Rolyan Aquaplast Original Resilient UltraPerf White 1.6mm Splinting Material (46 x 61cm)
The Rolyan Aquaplast Original Resilient UltraPerf White 1.6mm Splinting Material (46 x 61cm) is an extremely durable uncoated thermoplastic splinting material with a controlled stretch and excellent rigidity. Non-draping, this material offers some of the highest levels of control available, and features 100% memory for economical splint revision, reducing waste for less experienced therapists. Plus, by becoming translucent when heated, this material enables easy identification of pressure points and landmarks, helping you to provide maximum comfort to your patients.
What's Included?
The Watercolours Splinting Material is available as either a single sheet or a pack of four sheets. Your required option can be selected from the drop-down menu at the top of the page.
What Size Is the Splinting Material?
The Rolyan Splinting Material measures 46 x 61cm, allowing you to cut it to the required size. It features a thickness of 1.6mm.
Who Can Use the Aquaplast Resilient Solid White?
The Aquaplast Splinting Material is suitable for patients requiring the following:
- Splints requiring frequent revisions and serial splinting
- Neurological pathologies
- Medium and larger splints for the upper and lower limb including fracture bracing
Ultra-Thin Material
At just 1.6mm, this product is half the thickness and half the weight of standard 3.2mm splinting material. As such, it provides some of the highest rigidity and resistance to stretch available in a lightweight material.
UltraPerf 13% Perforation
This version of the Aquaplast Original features UltraPerf 13% perforation. As a result, the material is lighter and provides greater ventilation for improved comfort and compliance.
Handling Characteristics of the Rolyan Aquaplast Resilient 1.6mm
- Maximum resistance to stretch
- A non-draping material that provides maximum control
- Features 100% memory for reheating and splint revisions, reducing waste for less experienced therapists
- Translucent when heated, allowing identification of pressure points and landmarks for positioning
Bonding of the Rolyan Aquaplast Resilient Splinting Material
The Rolyan Aquaplast should be heated for 35 seconds in water at 65 to 70°C for 1 to 2 minutes of working time.
- Bonds permanently when heated surfaces are pinched together
- Bond is especially strong if material is dry-heated
Disclaimer: Please note that this product is supplied perforated, though the image above displays the solid version.
