Rolyan Aquaplast Resilient-T Solid White 3.2mm Splinting Material (46 x 61cm)
The Rolyan Aquaplast Resilient-T Solid White 3.2mm Splinting Material (46 x 61cm) is an extremely durable coated thermoplastic splinting material with a controlled stretch and excellent rigidity. Non-draping, this material offers some of the highest levels of control available, and features 100% memory for economical splint revision, reducing waste for less experienced therapists. Plus, by becoming translucent when heated, this material enables easy identification of pressure points and landmarks, helping you to provide maximum comfort to your patients.
What's Included?
The Watercolours Splinting Material is available as either a single sheet or a pack of four sheets. Your required option can be selected from the drop-down menu at the top of the page.
What Size Is the Splinting Material?
The Rolyan Splinting Material measures 46 x 61cm, allowing you to cut it to the required size. It features a thickness of 3.2mm.
Who Can Use the Aquaplast Resilient-T Solid White?
The Aquaplast Resilient Splinting Material is suitable for the following:
- Splints requiring frequent revisions and serial splinting
- Neurological pathologies
- Medium and larger splints for the upper and lower limb including fracture bracing
Stability and Firm Support
At 3.2mm thick, this product is the traditional thickness for splints, providing stability and firm support. This makes the material well-suited for a number of functions, including positioning and holding joints, aiding abnormal tone, contractures and fracture bracing. In general, the Rolyan Aquaplast Resilient-T 3.2mm is ideal for static, dynamic and progressive splinting of the upper and lower extremities.
Handling Characteristics of the Rolyan Aquaplast Resilient-T 3.2mm
- Maximum resistance to stretch
- A non-draping material that provides maximum control
- Features 100% memory for reheating and splint revisions, reducing waste for less experienced therapists
- Translucent when heated, allowing identification of pressure points and landmarks for positioning
Bonding of the Rolyan Aquaplast Resilient-T Splinting Material
The Rolyan Aquaplast should be heated for 1 minute in water at 65 to 70°C for 4 to 6 minutes of working time.
- For a temporary bond, pinch heated surfaces together
- For a permanent bond, remove coating with spirits or by safely scraping with a sharp instrument
