Aquaplast ProDrape-T Solid White 2.4mm Splinting Material (46 x 61cm)
The Aquaplast ProDrape-T Solid White 2.4mm Splinting Material (46 x 61cm) is a highly conformable thermoplastic material which is suitable for the creation of splints. At 2.4mm thick, this version of the material is less thick than that traditionally used for splints, helping to minimise bulkiness.
What's Included?
The Aquaplast ProDrape-T Solid Splinting Material is available as either a single sheet or a pack of four sheets. Please select your required option from the drop-down menu at the top of the page.
What Size Is the Splinting Material?
The Roylan Splinting Material measures 46 x 61cm, allowing you to cut it to the required size. It features a thickness of 2.4mm.
Who Can Use the Aquaplast ProDrape-T Solid White Splinting Material?
The Solid Aquaplast ProDrape-T Splinting Material is recommended for a number of conditions, including:
- Serial splinting (100% memory)
- Acute trauma
- Pain and joint pathologies
- Thumb, finger, wrist and hand based splints
- Dynamic outrigger bases
- Lightweight paediatric splints
Drapable and Conformable
The Aquaplast ProDrape-T Solid White Splinting Material features a high degree of natural drape. This provides an intimate and precise fit for increased patient comfort and minimal handling. Gentle, smooth motions achieve exceptional results and pressure and splint migration is reduced.This splinting material also features 100% memory, meaning repeated reheating is possible for economical splint revisions.
Transparent When Heated
The Aquaplast ProDrape-T becomes transparent when heated, allowing identification of pressure points and of landmarks for positioning to provide maximum comfort. Please note this applies to the White Aquaplast ProDrape-T only, and not any of the other colours.
Features of the ProDrape-T Solid White Splinting Material
- Drapes easily for minimal handling
- Conforms well to contours for an intimate fit
- Coated, allowing temporary bonds
- Transparent when heated, allowing identification of pressure points and landmarks
- Increased cost-effectiveness and reduced clinical waste
- Edges trim and rub smooth easily
- Biodegradable for easy disposal
- X-ray translucent
- Latex free for reduced irritation
Bonding of the Aquaplast ProDrape Splinting Material
The ProDrape Splinting Material can bonded in both temporary and permanent fashion:
- For a temporary bond, pinch heated surfaces together
- For a permanent bond, remove the coating with spirits or by safely scraping with a sharp instrument
Heating time should be one minute at 70 - 75°C, giving two to three minutes of working time.
